SeguridadPregunta 1279 de 1605
Before work begins near electrical circuits, if a worker could contact energized parts, the employer must:
a.Simply warn the worker to be careful
b.De-energize and lock/tag out the circuits, or guard them, so no worker contacts live parts
c.Increase the voltage to reduce risk
d.Post a sign and continue live work
Explicación
1926.416(a)(1) requires de-energizing and locking/tagging (or effectively guarding) circuits before employees work where they could contact energized parts, unless de-energizing introduces greater hazards.
Referencia Legal: 29 CFR 1926.416(a)(1)Practica las 1605 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- The top step or top cap of a stepladder should be used how?
- A portable ladder is found with a broken rung and a cracked side rail. The correct action is to:
- Lockout/tagout (LOTO) procedures are primarily intended to protect workers from:
- On construction sites, which system is required to protect workers using 120-volt, single-phase, 15- and 20-amp receptacle outlets not part of the permanent wiring?
- Before using or handling any electrical equipment or cords, workers should:
- For cranes and equipment operating near overhead power lines up to 50 kV, what minimum clearance is generally required if the line is not de-energized and grounded?
Última revisión: · proceso editorial
Sen Lin, Fundador de PrepPass · Verificado con California CSLB Contractor License Law & Business Exam · Cómo revisamos
Revisado por Abraham Chen — Licensed California General Contractor (CSLB License #1101856 — verificar)