SeguridadPregunta 1283 de 1605
A tag applied during tagout must:
a.Be optional if a lock is used
b.Be removed at the end of each shift regardless of status
c.Be attached to warn against operating the equipment and not be removed by anyone other than authorized personnel
d.Be a plain piece of paper with no words
Explicación
1926.417 requires tags to warn against energizing/operating equipment. Only authorized personnel may remove locks/tags, ensuring the servicing worker controls when the energy is restored.
Referencia Legal: 29 CFR 1926.417(b)Practica las 1605 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- On construction sites, which system is required to protect workers using 120-volt, single-phase, 15- and 20-amp receptacle outlets not part of the permanent wiring?
- Before using or handling any electrical equipment or cords, workers should:
- For cranes and equipment operating near overhead power lines up to 50 kV, what minimum clearance is generally required if the line is not de-energized and grounded?
- Head protection (hard hats) is required on a construction site whenever there is a possible danger of:
- Under OSHA's PPE rules, who generally must pay for required personal protective equipment?
- A worker is grinding metal, creating flying particles. What PPE is specifically required?
Última revisión: · proceso editorial
Sen Lin, Fundador de PrepPass · Verificado con California CSLB Contractor License Law & Business Exam · Cómo revisamos
Revisado por Abraham Chen — Licensed California General Contractor (CSLB License #1101856 — verificar)