Drainage, Waste & VentPregunta 10 de 120
A vent terminal passes through a roof that is used only for weather protection in an area with no snow-depth requirement. What is the minimum height the vent must extend above the roof surface?
a.3 in
b.6 in
c.12 in
d.24 in
Explicación
A vent through a roof used only for weather protection must extend at least 6 in above the roof. The 12 in dimension applies where the roof is used for any purpose other than weather protection, such as a deck or assembly area, and 3 in is below the minimum while 24 in exceeds what the code requires here.
Referencia Legal: UPC §906.1Practica las 120 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- A 2 in trap arm serves a floor-mounted fixture. The trap weir is at elevation 0. What is the greatest amount the trap arm may fall before it reaches the vent connection?
- Which trap arrangement is expressly prohibited because it will siphon its own seal?
- A 3 in horizontal drain is run 72 ft at 1/8 in per ft. The invert at the upstream end is at elevation 100.00 ft. What is the invert elevation at the downstream end?
- A vent terminal must be located away from an openable window. Which arrangement satisfies the code?
- Which fitting is acceptable for changing direction from horizontal to vertical in a drainage line?
- Which fitting is required to change direction from horizontal to horizontal in a drainage line?
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con Journeyman Plumber Licensing Exam (UPC/IPC-based) · Cómo revisamos