Core TradesCâu 117 / 700
Fiberglass batt insulation is compressed and stuffed tightly around wiring and into a cavity that is too shallow. The effect on thermal performance is:
a.No change; compression does not matter
b.Reduced R-value because compressed batts lose loft and trapped air space
c.Increased R-value because it is denser
d.It becomes a vapor barrier
Giải thích
Batt insulation relies on trapped air in its loft; compressing it reduces thickness and trapped air, lowering the effective R-value. Density does not raise R-value in this case, compression does matter, and it does not turn into a vapor barrier.
Trích dẫn luật: 2025 CA Energy Code (Title 24, Part 6)Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A water-resistive barrier (WRB) is being installed over wall sheathing. To shed water correctly, the horizontal laps must be arranged so that:
- Around a new window, the correct flashing sequence to integrate with the WRB is generally:
- Behind exterior stucco or siding, a drainage gap or weep provision is often required so that:
- In a mixed California climate, a vapor retarder placed on the WRONG side of the insulation can cause:
- CALCULATION: A ceiling requires R-49 insulation. If a certain blown insulation provides R-3.5 per inch, what minimum installed thickness is needed?
- A kickout (diverter) flashing is installed where a roof edge meets a vertical wall at the bottom of a roof-wall intersection. Omitting it commonly causes:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra