Planning & EstimatingCâu 551 / 700
Before forwarding a fabricator's shop drawings to the architect, what is the general contractor's PRIMARY responsibility?
a.Redesign the connections to reduce cost
b.Review and coordinate the drawings with field conditions and other trades, then stamp them
c.Forward them unopened to save time
d.Approve them on the architect's behalf
Giải thích
The GC must review and coordinate shop drawings against field dimensions and adjacent work, and stamp or note that review, before transmitting them to the design professional for final approval. Option a oversteps into design. Option c skips the required coordination that catches conflicts early. Option d usurps the architect's approval authority. The GC's review is a quality-control checkpoint, not final design approval.
Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- During construction you find the architectural drawings show a beam at one size but the structural drawings show a larger size for the same beam. What is the BEST first action?
- Two days before bids are due, the architect issues a document that changes the window schedule for all bidders. What is this document BEST called?
- The specifications name a specific product but add the phrase 'or equal.' A subcontractor wants to use a different brand. What is the BEST procedure?
- Before starting sitework, the crew needs a consistent reference for all elevations across the project. Which practice BEST establishes this?
- Near the end of a project, the owner and architect walk the building and create a list of incomplete or defective items to be corrected before final payment. What is this document BEST called?
- On a new residential project subject to CALGreen, a submitted showerhead is rated at 2.5 gallons per minute. What is the BEST assessment of water-efficiency compliance?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra