Dịch vụ & Phân phốiCâu 46 / 521
What is the full-load primary current of a 75 kVA, 3-phase, 480 V transformer?
a.156 A
b.125 A
c.90 A
d.72 A
Giải thích
I = 75,000 / (1.732 x 480) = 90.2 A, so about 90 A. The other choices omit the sqrt-3 factor or use the wrong voltage.
Trích dẫn luật: 2023 NEC §450.3Luyện miễn phí toàn bộ 521 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A dwelling has 10 kW of electric heat and a 5 kW air conditioner that never run at the same time. What load is included in the calculation?
- Service-entrance conductors must supply a computed load of 160 A continuous. What minimum conductor ampacity is required per 230.42?
- What is the full-load secondary current of a 45 kVA, 3-phase, 208 V transformer?
- For a transformer over 1000 V or with primary-only protection under 450.3(B), where primary current is 9 A or more, the primary OCPD generally may not exceed what percentage of primary full-load current?
- A transformer has a primary full-load current of 40 A and uses primary-only overcurrent protection. What is the maximum standard primary OCPD (125% rule)?
- Conductors are connected to a transformer secondary without an OCPD at the secondary terminals. What set of rules governs their length and sizing?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-10 Electrical Trade Examination · Quy trình kiểm tra