Brakes (A5)Pregunta 58 de 120
A brake caliper that sticks and does not release will most likely cause:
a.A soft pedal only
b.Dragging, overheating, and pulling to that side
c.Loss of all braking
d.A hard pedal at all times
Explicación
A seized caliper keeps the pads applied, causing drag, excessive heat, uneven pad wear, and a pull toward that wheel. Overheated fluid can boil and reduce braking. Rebuilding or replacing the caliper and inspecting the slides and hose corrects it.
Practica las 120 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- Technician A says brake shoes are used in disc brakes. Technician B says brake shoes are used in drum brakes. Who is correct?
- Technician A says a grinding, metal-on-metal noise during braking indicates friction material worn past its limit. Technician B says continued driving in that condition can score the rotor or drum. Who is correct?
- A rear disc parking brake that will not hold is often caused by:
- The metering valve in a combination valve is used to:
- When bleeding a conventional hydraulic brake system, the general rule is to bleed:
- A proportioning valve in the brake system is designed to:
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con ASE Automobile Certification Series (A1–A8) · Cómo revisamos