Brakes (A5)Pregunta 60 de 120
When bleeding a conventional hydraulic brake system, the general rule is to bleed:
a.All wheels at the same time
b.Only the front wheels
c.Starting at the wheel nearest the master cylinder
d.In the sequence specified by the manufacturer, often longest line first
Explicación
Manufacturers specify a bleeding sequence, frequently starting at the wheel farthest from the master cylinder, to purge air effectively. Following the correct order and keeping the reservoir full prevents introducing more air. Some ABS units require a scan tool to bleed fully.
Practica las 120 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- Technician A says a grinding, metal-on-metal noise during braking indicates friction material worn past its limit. Technician B says continued driving in that condition can score the rotor or drum. Who is correct?
- A rear disc parking brake that will not hold is often caused by:
- A brake caliper that sticks and does not release will most likely cause:
- The metering valve in a combination valve is used to:
- A proportioning valve in the brake system is designed to:
- Technician A says silicone (DOT 5) and glycol (DOT 3/4) brake fluids can be freely mixed. Technician B says brake fluid type is unimportant. Who is correct?
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con ASE Automobile Certification Series (A1–A8) · Cómo revisamos