Brakes (A5)Pregunta 59 de 120
The metering valve in a combination valve is used to:
a.Increase rear brake pressure
b.Warn of ABS faults
c.Bleed the master cylinder
d.Delay front disc application so rear drums engage together
Explicación
The metering valve holds off front disc pressure briefly so the rear drum shoes overcome their return springs and apply at nearly the same time, balancing braking. The proportioning section limits rear pressure to prevent lockup. Together these balance front-to-rear braking.
Practica las 120 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- Technician A says a grinding, metal-on-metal noise during braking indicates friction material worn past its limit. Technician B says continued driving in that condition can score the rotor or drum. Who is correct?
- A rear disc parking brake that will not hold is often caused by:
- A brake caliper that sticks and does not release will most likely cause:
- When bleeding a conventional hydraulic brake system, the general rule is to bleed:
- A proportioning valve in the brake system is designed to:
- Technician A says silicone (DOT 5) and glycol (DOT 3/4) brake fluids can be freely mixed. Technician B says brake fluid type is unimportant. Who is correct?
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con ASE Automobile Certification Series (A1–A8) · Cómo revisamos