Load & DesignPregunta 20 de 110
Latent load in a cooling calculation refers to the energy required to do what?
a.Raise the dry-bulb temperature of the air
b.Remove moisture (water vapor) from the air
c.Overcome duct friction
d.Power the compressor motor
Explicación
Latent load is the heat associated with condensing water vapor out of the air, lowering humidity. Sensible load changes air temperature, while latent load changes moisture content. Both must be met for comfort, especially in humid climates.
Practica las 110 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- Air velocity in a duct is calculated by dividing airflow (CFM) by what?
- A branch duct must deliver 200 CFM at a velocity of about 600 feet per minute. Approximately what free area is required?
- Under California energy standards, duct leakage in many new and altered systems must be verified by which method?
- Which condition would a technician correct by performing an accurate load calculation instead of using a rule of thumb like square footage per ton?
- A 3-ton system is selected for a home. At 400 CFM per ton, what is the target blower airflow?
- What is the main benefit of properly sizing equipment to a load calculation rather than oversizing?
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con California CSLB C-20 Warm-Air HVAC Trade Exam · Cómo revisamos