An toànCâu 1335 / 1605
Workers on a leading edge 6 feet or more above a lower level must be protected by:
a.Guardrails, safety nets, or personal fall arrest systems (or a fall protection plan where those are infeasible)
b.Only warning tape
c.High-visibility clothing
d.A supervisor watching them
Giải thích
1926.501(b)(2) requires conventional fall protection for leading-edge work at 6 feet or more. Only when the employer proves infeasibility/greater hazard may a written fall protection plan be used.
Trích dẫn luật: 29 CFR 1926.501(b)(2)Luyện miễn phí toàn bộ 1605 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- How far must a worker generally have to travel to reach a fire extinguisher (for ordinary Class A hazards) on a construction site?
- Good housekeeping on a construction site — keeping walkways clear of debris, scrap, and combustibles — primarily reduces the risk of:
- Danger, caution, and safety instruction signs on a jobsite are used to:
- In steel erection, at what height are workers generally required to be protected from fall hazards?
- On a scaffold, in addition to fall protection, what protects workers BELOW from falling objects such as tools?
- A safety net system used for fall protection must be installed as close as practicable under the work surface, but never more than how far below?
Cập nhật gần nhất: · quy trình kiểm tra
Sen Lin, Người sáng lập PrepPass · Đối chiếu với California CSLB Contractor License Law & Business Exam · Quy trình kiểm tra
Người kiểm duyệt Abraham Chen — Licensed California General Contractor (CSLB License #1101856 — kiểm tra)