An toànCâu 1336 / 1605
In steel erection, at what height are workers generally required to be protected from fall hazards?
a.6 feet
b.30 feet
c.15 feet (with controlled decking zones and connector provisions)
d.10 feet
Giải thích
1926.760 sets steel erection fall protection generally at 15 feet, with specific provisions for connectors and controlled decking zones. This is one of the industry-specific exceptions to the 6-foot rule.
Trích dẫn luật: 29 CFR 1926.760Luyện miễn phí toàn bộ 1605 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Good housekeeping on a construction site — keeping walkways clear of debris, scrap, and combustibles — primarily reduces the risk of:
- Danger, caution, and safety instruction signs on a jobsite are used to:
- Workers on a leading edge 6 feet or more above a lower level must be protected by:
- On a scaffold, in addition to fall protection, what protects workers BELOW from falling objects such as tools?
- A safety net system used for fall protection must be installed as close as practicable under the work surface, but never more than how far below?
- When working from an aerial lift (boom-type elevating work platform), workers must:
Cập nhật gần nhất: · quy trình kiểm tra
Sen Lin, Người sáng lập PrepPass · Đối chiếu với California CSLB Contractor License Law & Business Exam · Quy trình kiểm tra
Người kiểm duyệt Abraham Chen — Licensed California General Contractor (CSLB License #1101856 — kiểm tra)