An toànCâu 1338 / 1605
A safety net system used for fall protection must be installed as close as practicable under the work surface, but never more than how far below?
a.50 feet
b.100 feet
c.10 feet
d.30 feet
Giải thích
1926.502(c) limits safety nets to no more than 30 feet below the working surface and requires them to extend outward a sufficient distance and pass a drop test or equivalent.
Trích dẫn luật: 29 CFR 1926.502(c)Luyện miễn phí toàn bộ 1605 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Workers on a leading edge 6 feet or more above a lower level must be protected by:
- In steel erection, at what height are workers generally required to be protected from fall hazards?
- On a scaffold, in addition to fall protection, what protects workers BELOW from falling objects such as tools?
- When working from an aerial lift (boom-type elevating work platform), workers must:
- A warning line system, used in some low-slope roofing work, functions to:
- A 'controlled decking zone' (CDZ) in steel erection is an area where:
Cập nhật gần nhất: · quy trình kiểm tra
Sen Lin, Người sáng lập PrepPass · Đối chiếu với California CSLB Contractor License Law & Business Exam · Quy trình kiểm tra
Người kiểm duyệt Abraham Chen — Licensed California General Contractor (CSLB License #1101856 — kiểm tra)