The top edge of a standard guardrail top rail must be approximately what height above the walking/working surface?
Explicación
The federal standard sets the top edge at 42 inches, plus or minus 3 inches, above the walking or working level; California's section 1620(a)(1) states the same band from the other direction, as not less than 42 nor more than 45 inches. The other three are heights from rules that sit right beside this one. A midrail goes halfway down, and section 1620(a)(2) drops it only where a wall or parapet is at least 21 inches high. Thirty-six inches is how far a ladder's side rails must extend above the landing under section 1675. And 30 inches is the elevation at which section 3210(a) starts requiring a guardrail at all in general industry - a trigger height, not a rail height.
Referencia Legal: 29 CFR 1926.502(b)(1); 8 CCR §1620(a)(1)-(2); §3210(a); §1675Practica las 1632 preguntas gratis — sin registro.
Own the complete CSLB Law & Business guide — PDF + EPUB, $24.99 →
Preguntas relacionadas de este tema
- A worker must pass by or work near a floor hole or skylight opening. What protection is required?
- For residential construction where conventional fall protection is infeasible or creates a greater hazard, what does OSHA require of the employer at heights of 6 feet or more?
- A guardrail system used for fall protection must have a top rail capable of withstanding a downward/outward force of at least how much, applied within 2 inches of the top edge?
- At what depth does an excavation generally require a protective system such as sloping, shoring, or shielding to protect workers from cave-ins?
- Who must inspect an excavation for hazardous conditions before employees enter and as conditions change?
- For an excavation deeper than 20 feet, protective systems (such as shoring or shielding) must be:
Última revisión: · proceso editorial