In steel erection, to protect workers below from falling objects, all materials and tools at heights must be:
Explicación
All materials, equipment and tools not in use at height must be secured against accidental displacement, and loose items such as bolts, nuts and washers must be kept in closed containers. The rule is about the object moving, which is what each wrong answer misses. Lowering everything at the end of the shift (b) does nothing about the bundle kicked off a beam at ten in the morning. A two-foot setback from the edge (c) is the spoil-pile rule from section 1541(j)(2) of the excavation orders transplanted to a steel frame, where the deck is open on every side and there is no meaningful edge to set back from. And hard hats (d) are genuinely required for exposed workers below, as a second layer; a hat is rated for impact from a small object and does not make an unsecured load safe to leave.
Referencia Legal: 29 CFR 1926.759(a)-(b); 1926.100(a); 8 CCR §1541(j)(2)Practica las 1632 preguntas gratis — sin registro.
Own the complete CSLB Law & Business guide — PDF + EPUB, $24.99 →
Preguntas relacionadas de este tema
- When working from an aerial lift (boom-type elevating work platform), workers must:
- A warning line system, used in some low-slope roofing work, functions to:
- A 'controlled decking zone' (CDZ) in steel erection is an area where:
- Silica, lead, and asbestos standards all share which common employer requirement?
- OSHA requires the employer to instruct each employee in:
- A contractor with 3 employees insists it is 'too small' to need any safety program. The correct response is:
Última revisión: · proceso editorial